|Anonymous | Login | Signup for a new account||2020-07-13 09:19 CEST|
|Main | My View | View Issues | Change Log | Roadmap|
|View Issue Details|
|ID||Project||Category||View Status||Date Submitted||Last Update|
|0000644||madVR||bug||public||2020-05-26 10:57||2020-06-19 16:04|
|Platform||PC||OS||Windows||OS Version||7 x64 SP1|
|Summary||0000644: Profiling has not been finished|
|Description||When profiling finished with madTPG in DisplayCAL a dialog with "Profiling has not been finished" and halts the process. It happens walway with 115 patches, and most of the time with 79 patches, taking hours to hit a succesful calibration process.|
|Steps To Reproduce||Calibrate and profile with madTPG in DisplayCAL. Tested with a Spyder 3 and an i1 DisplayPro Plus|
|Additional Information||Not real solutions, all I could find on DisplayCAL forum:|
|Tags||No tags attached.|
|madVR Version||madVR v0.92.17|
|Media Player (with version info)||DisplayCAL 188.8.131.52|
|Splitter (with version info)||none|
|Decoder (with version info)||none|
|DXVA2 Scaling Active||no|
|Aero / Desktop Composition||On|
|Problem occurs with mode||all modes|
|GPU Model||GTX 1070|
|GPU Driver Version||441.66|
IIRC, the DisplayCAL dev made some improvements to help with issues like this, but it seems you're already using the latest DisplayCAL build, so I'm not sure what it could be. Are you using WLAN or wired LAN? Try wired LAN, maybe?
Might make sense to ask once more on the DisplayCAL forums? After all, the threads you linked to are both from 2018, which is quite some time ago.
|Now that you say that I am going to try with the firewall disabled. Not that I'm positive with that since I could get some calibrations with 79 patches. Florian is very intermittent and all I could read from him was to run as admin or reinstall madVR, which I already did -as admin- (it's a trivial thing).|
|I tested with firewall disabled and had the same issue. And again only profiling with 79 patches finished successfully. Would like to run longer tests for more accuracy.|
Are you using the official madVR build? If so, maybe you can try this one, as a test (just overwrite the files)?
I'm not sure if that will change anything, though, but might be worth trying, due to lack of better ideas right now. If DisplayCAL has a "madHcNet32/64.dll" in its directories somewhere, also please replace that with the latest build from the zip above.
|2020-05-26 10:57||phbgjf||New Issue|
|2020-05-27 18:49||madshi||Note Added: 0002701|
|2020-05-28 12:36||phbgjf||Note Added: 0002704|
|2020-06-19 10:49||phbgjf||Note Added: 0002709|
|2020-06-19 16:04||madshi||Note Added: 0002710|
|Copyright © 2000 - 2012 MantisBT Group|