View Issue Details

IDProjectCategoryView StatusLast Update
0000693madVRbugpublic2022-12-17 07:06
ReporterMilincho Assigned To 
PriorityurgentSeveritycrashReproducibilityalways
Status newResolutionopen 
Summary0000693: Crash just by selecting "Identification"
DescriptionI don't know what just happened to my madVR configuration but ALL my profiles just disappeared except one. If I click "Add profile"... it does nothing, and when I try to duplicate this one madVR crashes...

https://i.imgur.com/STEmGlT.png

I'm using 165, but tried 164b and the same. Tried uninstalling and reinstalling, same. Tried restoring default settings... same.

If I restore default settings, uninstall it, delete all the files, extract them from a new zip (even tested madVR09217, apart from 164b and 165) and install them again (with no settings.bin file).

Then I do the install.bat, open madHcCtrl.exe and when I try "Add Profile"... it does nothing.

https://i.imgur.com/0tiveQv.png

I also made sure that there is no HKEY_CURRENT_USER\Software\madshi\madVR present...

If I start from scratch my devices are not detected anymore, so I "Add device" and test profiles creation. First one is created, then trying to add more profiles using "Add profile" does nothing.

And if I use my settings.bin backup, where I had 3 profiles for "Epson PJ", now only 1 appears and it always crashes just by clicking on "Identification":

https://i.imgur.com/2ViVBMm.png


Steps To ReproduceIn my case, just clicking on "Identification".
Additional InformationScratch config crash report: https://pastebin.com/mALavv6m

My settings.bin configuration: https://mega.nz/file/XnQxlCTC#CS1zvEtHCaJ8v0M4uibPVa6cRwd6Z3VI2WQSBqe4GGM
and the crash report when it is used: https://pastebin.com/muUC9h9f
Tagscrash, devices, profile
madVR Version165 (any)
Media Player (with version info)Any
Splitter (with version info)Any
Decoder (with version info)Any
DecodingDXVA2 Native
Deinterlacingnone (progressive)
DXVA2 Scaling Activeno
Aero / Desktop CompositionOn
Problem occurs with modeall modes
GPU ManufacturerNVidia
GPU ModelRTX 4080
GPU Driver Version527.56

Activities

Milincho

2022-12-15 02:54

reporter   ~0002941

Settings.bin and Crash Reports
Settings and Reports.zip (60,785 bytes)

madshi

2022-12-15 13:59

administrator   ~0002942

Does this still happen with the latest madVR test build?

http://madshi.net/madVRhdrMeasure165.zip

(Just unzip these files over the official build.)

Milincho

2022-12-15 15:58

reporter   ~0002943

Yes. I was using 165 since you released it. Tried 164b and 09217 and all behave the same.

It was working until 2 days ago. I've been getting crashes in "Identification" for a long time, but other than that it was working ok.

I installed some AMD motherboard drivers, Nvidia 527.56 via NVCleanstall (after using DDU) and some Realtek drivers. But I'm not sure how any of this could broke madVR that much.a

Milincho

2022-12-15 16:01

reporter   ~0002944

Also tried changing installation from "C:\Program Files\MadVR" to "C:\MadVR" but keeps happening all the same.

madshi

2022-12-15 16:12

administrator   ~0002945

It seems that the crash happens when trying to parse the EDID block. I'm not sure why. Are you using an EDID override?

Milincho

2022-12-15 16:27

reporter   ~0002946

Yes, I am using a custom 1080p 59.938Hz resolution made in CRU to avoid dropped frames in PotPlayer. I also deleted the HDMI resolutions from the Extension Block.

madshi

2022-12-15 16:45

administrator   ~0002947

What happens if you remove the custom EDID override? Does the problem go away then? If so, maybe putting it back afterwards solves the issue?

Milincho

2022-12-15 19:31

reporter   ~0002948

Same. Even if I "Reset All" to defaults in CRU and restart, "restore default settings.bat" in madVR and "install.bat" when I launch madHcCtrl.exe it doesn't detect any devices, and if I create a new one and create a profile, it also does nothing when clicking "Add Profile" again:

https://i.imgur.com/bRwdjuG.png

and if I "Duplicate Profile" it crashes as usual:

https://i.imgur.com/OF9XTNr.png

Attached is the new Crash Report.

Milincho

2022-12-17 07:06

reporter   ~0002949

More info. If I move the custom resolution from "Detailed resolutions": https://i.imgur.com/4dclfkJ.png
to the "Detailed resolutions" INSIDE the Extension Block: https://i.imgur.com/0k8AgsJ.png
then madVR allows me to create new Profiles and even duplicate them without crashing, BUT it still crashes in the "Identification" section: https://i.imgur.com/4Bo2vpW.png
image.png (135,137 bytes)   
image.png (135,137 bytes)   
image-2.png (196,681 bytes)   
image-2.png (196,681 bytes)   
image-3.png (353,796 bytes)

Issue History

Date Modified Username Field Change
2022-12-15 02:50 Milincho New Issue
2022-12-15 02:50 Milincho Tag Attached: crash
2022-12-15 02:50 Milincho Tag Attached: devices
2022-12-15 02:50 Milincho Tag Attached: profile
2022-12-15 02:54 Milincho Note Added: 0002941
2022-12-15 02:54 Milincho File Added: Settings and Reports.zip
2022-12-15 13:59 madshi Note Added: 0002942
2022-12-15 15:58 Milincho Note Added: 0002943
2022-12-15 16:01 Milincho Note Added: 0002944
2022-12-15 16:12 madshi Note Added: 0002945
2022-12-15 16:27 Milincho Note Added: 0002946
2022-12-15 16:45 madshi Note Added: 0002947
2022-12-15 19:31 Milincho Note Added: 0002948
2022-12-17 07:06 Milincho Note Added: 0002949
2022-12-17 07:06 Milincho File Added: image.png
2022-12-17 07:06 Milincho File Added: image-2.png
2022-12-17 07:06 Milincho File Added: image-3.png